View 5826-105_192044.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Components
Features
s Off-the-shelf reference cables for all RIFOCS return loss meters Tighter tolerances for maximum measurement accuracy Low insertion loss High return loss Broad range of terminations available, including FC, SC, ST, DIN, and E2000 Precision PC and APC (8 angle-polished) endface profiles conform to TELCORDIA GR-326 requirements Labeled with unique serial number and measured insertion loss values Shipped with Certificate of Compliance and endface geometry plot Economical and efficient CORE reference cable exchange/replacement program is ideal for manufacturers s s s s
5800 Series
Multimode Reference Cables
Applications
General Fiber Optic Testing
RIFOCS 5800 Series multimode reference cables are manufactured to tighter tolerances and higher standards than regular fiber optic cables. All reference cables manufactured by RIFOCS must conform to stringent insertion loss (0.15dB, max.), return loss (40dB, min.), and endface specifications. RIFOCS reference cables are also accompanied by a Certificate of Compliance and a plot of the endface geometry. In addition, all reference cables manufactured by RIFOCS are labeled with a unique serial number and the insertion loss values obtained during quality assurance testing. To ensure maximum accuracy, high quality reference cables are essential when performing measurements using the 680MRL Series, and 780RL Series multimode return loss meters. All 5800 Series multimode reference cables are available with 50/125m, 62.5/125m, or 100/140m graded-index fiber. All standard reference cables are terminated with a FC-APC connector on one end for a direct connection to the optical interface of RIFOCS return loss meters. The termination of the other end is specified using the product codes listed in the Ordering Information table on the back of this sheet. Custom reference cables manufactured to customer specifications are also available. Contact RIFOCS Corp. for more information.
s
s
s
Specifications
Insertion loss: Reference end Instrument end Return loss: Reference end, PC Instrument end Connector profile (per GR-326): Radius of curvature Apex offset Length Launch condition: 50/125m 62.5/125m 100/140m 0.15dB 0.25dB 40dB 45dB
s
7mm to 25mm 50m 3 meters
Per TIA-568B.3 Per TIA-568B.3 Per SAE ARP5061 (draft)
RIFOCS Corporation
Fiber Optic Instruments & Components
1340 Flynn Rd. Camarillo, CA 93012 Phone: (805) 389-9800 Fax: (805) 389-9808 http://www.rifocs.com
Components
Ordering Information
5800 Series MM Reference Cables
Product Code 58-MTRJ-106 5826-105 5826-106 5826-110 582K-105 582K-106 582K-110 5836-105 5836-106 5836-110 583K-105 583K-106* 583K-110 5866-105 5866-106 5866-110 586K-105 586K-106* 586K-110 58E2-105 58E2-106 58E2-110
* Stock configuration.
5800 Series
Multimode Reference Cables
The correct part number for each CORE replacement cable is CORE-XXXX; XXXX is the original reference cable part number. For example, a previously purchased 5926 is exchanged with a CORE-5926. The cost for each CORE replacement cable is a flat charge of $75 per cable (subject to change without notice). 3) Replacement/recertified CORE reference cables will be shipped from RIFOCS within 48 hours (24 hours for stock configurations, indicated by asterisks in the Ordering Information table, at left. As both a manufacturer of test equipment and precision cable assemblies, RIFOCS understands the special needs of manufacturers requiring quick, efficient response and replacements. We understand that connectors are often subject to misuse, mishandling, and lack of proper maintenance, i.e., cleaning, and have designed this program with production houses in mind. For questions or comments regarding the CORE reference cable replacement program, please contact the CORE representative by phone or e-mail. We will respond within 24 hours.
CORE Reference Cable Exchange Program
The CORE (Cable Optical Reference Exchange) program gives RIFOCS reference cable users the ability to receive recertified reference cables quickly and economically. Instead of sending in a reference cable for recertification, which can be time consuming and costly if the cable cannot be recertified, RIFOCS will exchange a customer's cable with a recertified cable of the same type. Reference cables have a limited life, since fiber optic connectors can only be repolished a finite number of times before the ferrule becomes too short to be used. With the CORE program, replacement of worn-out or damaged reference cables is no longer a problem. To take advantage of the CORE program, follow the instructions below: 1) Obtain an RMA number by calling RIFOCS at (805) 389-9800 and asking for the CORE representative, or e-mail the CORE representative at coreprogram@rifocs.com. In either case, note the model numbers appearing on the ID label of each cable and quantity of reference cables being returned for CORE exchange. 2) Ship the cables, freight prepaid, with a purchase order allowing for NET 30 DAYS subject to approved credit, or a credit card payment. If paying by credit card, include the card type, e.g., MasterCard, Visa, American Express, etc., the account number, expiration date, and the authorized name on the card. Note the RMA number on front of the package and on the purchase order. Note the preferred return shipping method and account number if required (otherwise FOB CAMARILLO).
Description MT-RJ, PC, 62.5/125m FC-PC, DIAMOND, 50/125m FC-PC, DIAMOND, 62.5/125m FC-PC, DIAMOND, 100/140m FC-PC, ceramic, 50/125m FC-PC, ceramic, 62.5/125m FC-PC, ceramic, 100/140m ST-PC, DIAMOND, 50/125m ST-PC, DIAMOND, 62.5/125m ST-PC, DIAMOND, 100/140m ST-PC, ceramic, 50/125m ST-PC, ceramic, 62.5/125m ST-PC, ceramic, 100/140m SC-PC, DIAMOND, 50/125m SC-PC, DIAMOND, 62.5/125m SC-PC, DIAMOND, 100/140m SC-PC, ceramic, 50/125m SC-PC, ceramic, 62.5/125m SC-PC, ceramic, 100/140m E-2000-PC, DIAMOND, 50/125m E-2000-PC, DIAMOND, 62.5/125m E-2000-PC, DIAMOND, 100/140m
NOTE: RIFOCS reference cables are serialized to facilitate organization and tracking by ISO9000-based quality systems. CORE replacement cables will always have a different serial number than the original cable. If the reference cables are being tracked (a good quality assurance practice), all records should be updated upon receipt of the CORE replacement cables.
Reference Cable Care and Cleaning
Reference cables are delicate pieces of test equipment, but can last a long time if properly cared for. To ensure maximum reference cable life, all fiber optic connectors must be cleaned every time they are mated. Failing to clean a fiber optic connector can destroy it the first time it is mated, while a properly cared for connector will last for more than 500 matings. The figure at right depicts connector endfaces before and after cleaning. A RIFOCS 945 All-In-One cleaning tool is a quick, convenient method for ensuring proper connector care. The 945 All-In-One cleaning tool contains a special cloth tape that removes endface contaminants without additional consumables, such as alcohol. Another way to clean a fiber optic connector is to wipe it with a lint-free nonabrasive paper tissue, such as Texwipe TX404, using a new spot on the tissue each time the endface is touched. If the connector is extremely dirty, moisten the tissue with reagent-grade isopropyl alcohol before cleaning. Make sure all residual alcohol has evaporated before mating the connector. When mating fiber optic connectors together, make sure that nothing touches or scratches the endfaces. To do so, rock the connector into the adapter by first touching the side of the connector to the adapter.
RIFOCS Corporation
Fiber Optic Instruments & Components
ISO 9001
DS-C5800 Rev. A
1340 Flynn Rd. Camarillo, CA 93012 Phone: (805) 389-9800 Fax: (805) 389-9808 http://www.rifocs.com

▲Up To Search▲

Price & Availability of 5826-105

	To Download 5826-105 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .